清洗机网
通过式清洗机
通过式清洗机
通过式清洗机
往复式清洗机
悬挂链通过式清洗机
活塞杆清洗机
活塞杆清洗机
缸筒清洗机
缸筒清洗机
长缸筒清洗机
缸筒组合式清洗机
单工位清洗机
缸体翻转清洗机
人才招聘_Jobs
优秀的人才团队永远是构筑百年企业的基石,是推动企业持续发展的动力,是企业引领运动潮流的源泉。
您对我们充满梦想,我们对您充满期待......
在线订单_Order
欢迎你选购我们公司的产品!
请您将所需的产品情况填入下面的表格,我们将制定有效的可行性方案给您,我们收到你的订单后会在最短的时间内响应。
新闻中心_News
清洗机>>新闻中心
高压清洗机常见5种故障维护
发布者:xiaoyi555  日期:2019-09-19  点击:81
小易为你介绍一下高压清洗机常见5种故障维护
高压清洗机长时间的使用以及缺乏定期对他的维护保养,就是发生进口高压清洗机发生故障的时候,这就要求我们的清洗机操作人员及时根据不同的故障找出原因,解决原因,以免影响到以后的使用。

故障以及解决方案。

1、运行过程中出现异常尖叫声

导致这一现象发生的主要原因是由于电机轴承缺油,这是我们需要及时在电机的注油孔注入普通黄油,这种现象发生的不多,我们平时再给进口高压清洗机定期检修维护时给予补充就可以了。

2、进口高压清洗机压力不稳定

进口高压清洗机压力不稳定主要是因为高压水泵或进水管路内吸入了空气所导致的,这时需要检查水源的压力是否足够,进水过滤器是否堵塞,如果发现进水滤网堵塞,将滤网取下用水清洗就可以了。

3、运行一段时间后压力降低

进口高压清洗机在运行一段时间后压力会有所降低,这种现象首先要检查清洗机高压喷嘴是否严重磨损,普通压力设备的高压喷嘴基本上不会出现磨损现象,因为我们所配的高压喷嘴都进行过热处理。而超高压设备的高压喷嘴就难以保证了。其次需要分别检查调压阀和水泵内部的密封组件。

4、高压水泵出现异响

高压水泵出现异响是因为水泵中吸入了空气,或是流量阀弹簧损坏或者是曲轴箱轴承损坏。一旦出现这种现象就要联系生产厂家协助维修。

5、调压阀压力正常而高压水枪开枪不出水

在使用过程中,我们也许会发生调压阀压力正常而高压水枪开枪不出水或者高压喷嘴喷射的水射流不规则、分散,这说明高压喷嘴有异物堵塞,需要把高压喷嘴卸下进行清理。
英文:

Xiaoyi will introduce to you five common troubleshooting of high-pressure cleaning machine


The long-term use of the high-pressure cleaner and the lack of regular maintenance of it are the time when the imported high-pressure cleaner breaks down, which requires our cleaner operators to find out the causes according to different faults in time and solve the causes so as to avoid affecting the future use.


Faults and solutions.


1. Abnormal screaming during operation


The main reason for this phenomenon is that the motor bearings are short of oil. This is why we need to inject ordinary butter into the oil injection hole of the motor in time. This phenomenon does not occur much. We usually give supplements to the imported high-pressure cleaning machine when it is regularly repaired and maintained.




2. Pressure instability of imported high pressure cleaner


The pressure instability of imported high-pressure cleaner is mainly caused by the inhalation of air in high-pressure pump or intake pipeline. At this time, it is necessary to check whether the pressure of water source is enough and whether the intake filter is blocked. If it is found that the intake filter is blocked, the filter can be removed and cleaned with water.


3. Pressure decreases after a period of operation


The pressure of imported high-pressure cleaning machine will be reduced after a period of operation. This phenomenon first needs to check whether the high-pressure nozzle of the cleaning machine is seriously worn. The high-pressure nozzle of common pressure equipment will not appear wear phenomenon basically, because the high-pressure nozzles we are equipped with have been heat-treated. The high pressure nozzle of the ultra-high pressure equipment is difficult to guarantee. Next, the pressure regulating valve and the sealing components inside the pump need to be checked separately.


4. Abnormal sound of high-pressure water pump


The abnormal noise of high-pressure water pump is caused by the inhalation of air in the pump, or the damage of flow valve spring or crankcase bearing. Once this phenomenon occurs, contact the manufacturer to assist in maintenance.



5. Regulating valve pressure is normal and high pressure water gun can't shoot water.


In the course of using, we may have normal pressure of pressure regulating valve and irregular and scattered water jet from high-pressure water gun or high-pressure nozzle, which indicates that foreign matter is blocked in high-pressure nozzle and high-pressure nozzle needs to be unloaded for cleaning.

 
[返回] [打印]
Copyright © www.qingxijiw.com 清洗机网 All reserved. 公司地址:江苏无锡惠山区西漳工业园漳兴路1-5号 联系人:王经理 销售热线:13812298052 电话:0510-83508107

清洗机网专业生产销售清洗设备、清洗机、涂装设备、自动通过式清洗机、悬挂输送式清洗机、超声波清洗机、烘干机、生产装配线等设备的专业厂家,价格实惠,欢迎咨询!

友链: 技术支持:速联科技