轮胎清洗机的开发以市场需求定位，在LTQXl型的基础上做了较大改进和提高，主要适用于建筑工地、矿山、垃圾填埋场、采石场等地方的出口处。在项目组设计人员的精心设计下，LTQX2型清洗机结构紧凑，不仅能清洗不同轴距的各种单、双后桥车辆；还能够有效清除车辆清洗后留下的泥沙和脏物，并可实现水循环再生。

The development of tirecleaning machine（www.qingxijiw.com） is based on the market demand, and has made great improvementand improvement on the basis of LTQXl model, which is mainly applied to theexport of construction sites, mines, landfills, quarry and so on. Under the carefuldesign of the project design team member and LTQX2 cleaning machine, compactstructure, can not only clean the different wheelbase of all single, dual rearaxle vehicle; also can effectively remove the vehicle cleaning after leavingthe sediment and dirt, and can achieve water recycling.

激光清洗技术是近10年来飞速发展的一种新型清洗技术，它以自身的很多优点在很多领域中逐步取代了传统清洗工艺。

Laser cleaning technology isa new type of cleaning technology developed rapidly in recent 10 years. It hasgradually replaced the traditional cleaning technology in many fields with itsown advantages.

激光清洗技术是指采用高能激光束照射工件表面，使表面的污物、锈斑或涂层发生瞬间蒸发或剥离，高速有效地清除清洁对象表面附着物或表面涂层，从而达到洁净的工艺过程。

Laser cleaning technology isreferred to as the high-energy laser beam irradiation on the surface of theworkpiece, flash evaporation and stripping of the surface dirt, rust orcoating, the high speed effectively remove clean object attached to the surfaceof the material or surface coating, so as to achieve the clean process.

激光清洗机就其用于模具清洗的机理而言，就是利用清洁基片(也称为母体)与表面附着物(污物)对某一波长激光能量，具有差别很大的吸收系数。辐射到表面的激光能量，大部分被表面附着物所吸收，使之受热或汽化蒸发、或瞬间膨胀，并被表面形成的蒸汽流带动，脱离物体表面，达到清洗目的。

Laser cleaning on themechanism of the mold cleaning, is to use a clean substrate (also known as thematrix) and surface attachments (dirt) on a wavelength of laser energy, with asignificant difference between the absorption coefficient. Radiation to laserenergy of the surface, most of them are attached to the surface of theabsorption, so that heat of vaporization or evaporation, or a moment expansion,and is formed on the surface of the steam flow is driven, from the surface ofthe object, to achieve the purpose of cleaning.

具体用于轮胎模具清洗，模具吸收特定波长的激光，能量极小，不会造成损伤，模具表面污物(硫化物、无机氧化物、硅油、炭黑等)吸收大量的能量，被瞬间膨胀、汽化蒸发，带离模具表面，从而达到清洗的效果。

Specific for cleaning tyremould, mold to absorb certain wavelengths of laser, minimal energy and does notcause damage to the, mold surface dirt (sulfide, an inorganic oxide, siliconeoil, carbon black, etc.) absorbing a lot of energy, moment expansion andvaporization, take away from the mold surface, so as to achieve the effect ofcleaning.